https://www.XPOtool.com
Item 61540, 61541
Page 3
The Tool Experts
05 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Intended usage
This tool is an electric pump. It is used for pumping water and other similar water applications.
Unpacking
After opening the package, please ensure that the products are complete. If the products are damaged
or there is something missing, please do not use it and bring it back to your dealer. If you give this tool
to another person, please give him this instruction manual as well.
Safety regulations
Failure to observe the following safety instructions can lead to serious and even fatal
injuries! To operate the device safely, users must read and understand the instructions
carefully before using it for the first time.
•
Follow all safety instructions. Otherwise, you and others could suffer injuries.
•
Retain the application and safety information for future use. The device may only be used if it is
functioning normally.
•
Only use the device in accordance with the safety instructions and technical requirements spec-
ified in the manual.
•
The semi-solid and solid form of the devices is designed so that they can be used in the house
and in the garden, e.g., for spray water and irrigation.
•
Use the device only within its performance range. Do not use the device if the switch does not
turn on and off.
•
The device must not be used for supplying water or for transporting drinking water.
•
Do not use the device in a room that contains flammable or combustible liquids or gases.
•
If components that have not been tested or approved by the manufacturer are used improperly,
there is a risk that the device may suffer unforeseen damage.
•
Any application that deviates from the intended use specified in the instructions is considered
improper. The manufacturer is not responsible for any problems caused by this and is not within
the manufacturer’s scope of liability.
•
Please ensure that the closed device cannot accidentally start up.
•
The device must be connected to a properly installed and earthed socket.
•
There must be a safety line that interrupts the current if the fault current exceeds 30
mA.
•
Make sure that the power supply meets the requirements for connecting the device.
•
Do not kink, pull, or pinch the power cord; otherwise, the cord may break.
•
Check the plug and power cord before use. If the power cord is damaged, unplug it immediately.
Do not use the device if its power line is damaged.
•
If the device is not used, switch off the device and pull the plug.
