Xorcom UC926, User Manual

Page: 179 / 195

UC926 IP Phone
Copyright © 2019 Xorcom Ltd. All rights reserved Page 179 of 195
Multicast Paging
You can use multicast paging to quickly and easily forward out time sensitive announcements to
people within the multicast group. You can configure a multicast paging key or a paging list key on
the phone, which allows you to send a Real Time Transport Protocol (RTP) stream to the pre-
configured multicast address(es) without involving SIP signaling. You can configure the phone to
receive an RTP stream from pre-configured multicast listening address(es) without involving SIP
signaling. You can specify up to 10 multicast listening addresses.
Sending RTP Stream
Configuring a Multicast Paging Key using the hone interface
1. Press Menu →Features →line or Line Key →Line Key2
（
e.g.
）
2. Press Left arrow or Right arrow key or Switch key to select the Multicast Paging in the Type
field.
3. Enter the multicast IP address and port number (e.g., 224.5.6.20:2000) in the Value field.
4. The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
5. Press OK or Save soft key to save the configuration
Configuring a Multicast Paging Key using the web interface
1. Function keys->Line key:
2. Select a key and select Multicast Paging in the Type.
3. Enter the multicast IP address and port number (e.g., 224.5.6.20:2000) in the Value field.
4. The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
5. Click the SaveSet button to save the configuration.
Sending RTP Stream:
1. Press the multicast paging key when the phone is idle.
2. The phone sends RTP to a preconfigured multicast address (IP: Port). Any phone in the local
network then listens to the RTP on the preconfigured multicast address (IP:Port). For both
sending and receiving of the multicast RTP, there is no SIP signaling involved.
3. The multicast paging key LED illuminates steady green.