XONTEL Plus PBX User Manual Download

Page: 8 / 118

1.3

Product Appearance

Front View:

Back View:

1.4

Description of Indicators

Indicator

Definition

Status

Description

PWR

Power Indicator

Off

There is no power supply or power supply is
abnormal.

The XonTel Plus device is powered on.

RUN

Running Indicator

Slow

Flashing

The device is initialized successfully and is
running normally

The device is being initialized.

Off

The device is not running normally.

FXO

FXO In-use
Indicator

Fast
Flashing

The FXO port is connected with PSTN line and
is in idle status

Slow
Flashing

The FXO port has yet to be connected with
PSTN line, but is in normal status.

The FXO port is currently occupied by a call.

Off

The FXO port is faulty.

WAN/LAN

Network Connection
Indicator

Off

Network does not work or network cable is not
connected to the WAN/LAN port.

Fast

Flashing

Network is successfully connected.

Summary of Contents for Plus PBX























































































































Search results

Summary of Contents for Plus PBX

Reviews:

Related manuals for Plus PBX

Brands by name

Popular brands

XONTEL Plus PBX, User Manual

Search results

Summary of Contents for Plus PBX

Reviews:

Related manuals for Plus PBX

Brands by name

Popular brands