XONTEL Plus PBX User Manual Download Page 48

Page: 48 / 118

5.4

Network

XonTel Plus works in two modes: route mode and bridge mode. When it is under the route mode, the IP of WAN must

be different from the IP of LAN. But when it is under the bridge mode, the IP of WAN and the IP of LAN are the same.

5.4.1

Setting

On the

Network



Setting

interface, you can set the IP address of WAN port and LAN port.

Under the route mode, the default IP address of WAN port is a DHCP IP address, while the default IP address of the
LAN port is

192.168.11.1

In fact, there are three kinds of IP addresses for selection for WAN port and LAN port, including Static IP address,

DHCP and PPPOE.

DHCP: Obtain IP address automatically

XonTel Plus is regarded as a DHCP client, which sends a broadcast request and looks for a DHCP server to answer.
Then the DHCP server automatically assigns an IP address to the XonTel Plus from a defined range of numbers.

Summary of Contents for Plus PBX























































































































Search results

Summary of Contents for Plus PBX

Reviews:

Related manuals for Plus PBX

Brands by name

Popular brands

XONTEL Plus PBX, User Manual

Search results

Summary of Contents for Plus PBX

Reviews:

Related manuals for Plus PBX

Brands by name

Popular brands