XONTEL Plus PBX Page 34 User Manual Download

Page: 34 / 118

Parameter

Explanation

Name

The name of the new user. After it is established, the name and the password will be used to

log into the web page of the device.

User Group

You can choose a role for the new user, such as administrator, operator and observer. The

default value is administrator.

New Password

Setting the login password for the new user. The password needs to consist of 8 to 32

characters.

Expiration

The expiry date when the user cannot log in the device any more.

Status

Choose enable or disable.

Web Access

Permission

The permissions to view status, system, network, profile, extension, trunk and call control.

5.3.3

Provision

Provision is used to make XonTel Plus automatically upgrade with the latest firmware stored on an HTTP server, an

FTP server or a TFTP server.

As for how to configure XonTel Plus and HTTP/FTP/TFTP server for Provision, please make reference to the

instruction guide of Provision.

Select the checkbox on the right of

Enable

, and you will see the following interface:

Summary of Contents for Plus PBX























































































































Search results

Summary of Contents for Plus PBX

Reviews:

Related manuals for Plus PBX

Brands by name

Popular brands

XONTEL Plus PBX, User Manual

Search results

Summary of Contents for Plus PBX

Reviews:

Related manuals for Plus PBX

Brands by name

Popular brands