XONTEL Plus PBX Page 13 User Manual Download

Page: 13 / 118

2.3.1

Network Connection Diagram under Route Mode

Under the route mode, the default IP address of

WAN port is a DHCP IP address, while the default IP address of the

LAN port is a static IP address, namely

192.168.11.1

Note: The IP address of LAN port of the PBX and the IP address of PC must be at the same network segment, while

that of WAN port is at a different network segment.

2.3.2

Network Connection Diagram under Bridge Mode

Under the Bridge mode, the IP address of WAN port is the same with that of LAN port. Generally, when the PBX

works under the bridge mode, the IP address of the PBX has been modified. In the following diagram, it is assumed

that the IP address has been modified into 172.16.80.1.

Note: The IP address of PC and that of WAN port of the XonTel Plus PBX are at the same network segment.

Plus

PBX

Plus

PBX

Summary of Contents for Plus PBX























































































































Search results

Summary of Contents for Plus PBX

Reviews:

Related manuals for Plus PBX

Brands by name

Popular brands

XONTEL Plus PBX, User Manual

Search results

Summary of Contents for Plus PBX

Reviews:

Related manuals for Plus PBX

Brands by name

Popular brands