1.11 ADJUSTING THE ISOFIX
Pulling the red handle attached to the base meanwhile pull out both
ISOFIX arms as far as they will go.If you want to remove ISOFIX fitted, Pulling
the red handle attached to the base meanwhile pull in both
ISOFIX arms as far as they will go.
1.12 INSTALLING THE CAR SEAT AND PLACING THE
CHILD IN THE VEHICLE
Group 1 (9-18kg) with Top tether, Universal use
WARNING! Your ISOFIX Group 1 car seat MUST be fitted using the Top
Tether strap provided!Your child’s safety cannot be guarant eed if you
install your ISOFIX Group 1 car seat without the top Tether strap.
1. Put the headrest of the car seat at its lowest position. old the Top
Tether strap over the back of the car seat so that it does not get
trapped during installation
2. Extend the ISOFIX/EASYFIX connectors from the car seat as far as
possible by pulling simutaneously on the red handle on the base and
the
