red ISOFIX/EASYFIX system strap(Refer to 1.11).
3. Position the car seat on the rear seat of the vehicle bring the
ISOFIX/EASYFIX connectors in line with the seat’s ISOFIX anchor points .
4. Click the ISOFIX/EASYFIX connectors into the anchor points; the
indicators on each connector should turn from red to green.
5. Release the safety catch of the ISOFIX/EASYFIX system by pulling the
red handle attached to the base and gently pushing the car seat until the
rear of the car seat is a pressed firmly against the vehicle seat.
7.Bring the top Tether strap over the vehicle seat and attach the clasp to
the vehicle's Top tether anchor point.
8.Push the car seat against the back of vehicle seat and pull on the loose
end of the top Tether strap.When the belt is fully tightened,the indicator
on the top Tether strap will tern from red to green.
9.Then,refer to 1.6/1.8/1.9 to place your child in the baby car seat.
