10. If you want to remove ISOFIX fitted, Pulling the red handle attached to
the base meanwhile pull in both ISOFIX arms as far as they will go.
Group
2&3 (15-36kg) with 3-point Safety Belts, Universal u
se
Ensure the child car seat is correctly installed using either the ISOFIX
system or if no ISOFIX system is available, that the child car seat is
pushed firmly into the vehicle seat. If using the ISOFIX system to install
the car seat, then you may optionally use the top tether.If you are just
using the 3-point seatbelt to install the car seat, then you MUST NOT use
the top tether.
Please refer to 1.7 Remove the 5 point harness.
1.Put the child seat on a forward-facing vehicle seat.
2.Position your child in the child car seat and place the shoulder belt
through the shoulder belt guide. The shoulder belt should pass over your
child’s shoulder and should not be against their neck.
3. Place the lap belt over your child’s lap and fasten the seatbelt ensuring
the lap belt is routed through both armrests and the shoulder belt passes
through the armrest nearest the buckle.It is ok when you hear the "Click".
