background image

- 28 -

XOMI Spec Sheet

Model:

 XOMI36G - XOMI42G

Sizes:

 36"- 42"  

Depth:

 23-5/8"

Features and Benefits:

-  600 CFM high velocity blower optimally removes  
  Smoke, Grease and Odors.

-  3+1 speed electronic illuminated controls.

-  Four  20W  Halogen  Lights  -  Provide  brilliant  
  illumination over the cooking surface.

-  High  quality  Stainless  Steel  with  incomparable  
  handcrafted Italian finish.

-  Aluminum Mesh Filters - Trap airborne smoke and
  grease particles. They can be easily be removed for  
  dishwasher-safe cleaning.

-  Standard Chimney fits ceilings up to 9 ft tall, optional  
  chimney extension for ceilings up to 10 ft.

-  Mounting Height from cooking surface 27"-32".

Duct Options and Electrical Requirements:

-  6 inch duct required.

-  Ductless Option for applications where no ducting  
  in available.

-  AC 120v-60Hz (4.18amp).

Options:

-  Optional duct cover extension is available for ceiling  
  heights up to 10 ft tall.
 

Model: XOEDCMI

-  Optional  recirculating  kit  if  outside  venting  is  
  available.

  Model: XORFK01

XO is Exclusively Distributed by:
Eastern Marketing Corp 24 Eisenhower Parkway Roseland,
New Jersey 07068 800-966-8300
www.easternmarketingcorp.com

www.xoappliace.com

Summary of Contents for XOMI36G





























Reviews: