![background image](http://html1.mh-extra.com/html/smeg/k24x60/k24x60_brochure-and-specs_1304391001.webp)
ID090512
Code K24X90
K24X60
smeg 60cm wallmount rangehood
COMMERCIAL ONLY PRODUCT
EAN
8026493012162
finish
satin stainless steel
size
600mmW x 500mmD
installation
wall mount
motor
135 watt capacitor start, centrifugal, double impellor, two-
directional air uptake
air extraction
exhaust to atmosphere or recirculate to kitchen
NB: recirculation panel supplied
capacity
510m³/hr net, 683m³/hr gross
speeds
three plus OFF push buttons
illumination
two 40 watt SES tubular globes, separate ON/OFF button
filtration
2 x aluminium 4-ply grease filters, removable, washable
noise
44–60 dBA
ducting
150mm or 125mm diameter ducting required
NB: 150/125mm diameter adaptor supplied
recirculation
lower chimney vented for optional recirculation, recircula-
tion panel provided
optional
• charcoal filter pair, part no 08999801
• half stainless steel wall plate, 600mmW x 650mmH,
code 14201
• extra-long upper chimney piece, 800mm net length;
stainless steel code 9955
warranty
two years parts and labour
APPLICATION
Designed for wall mounting above a cooktop, the K24, with
two-part telescopic flue, is perfect for kitchens with heights to
2690mm (approximately 8’10”). Small increments in greater than
2690mm heights can be gained by increasing the bench height
and/or increasing the gap between the underside of the hood and
benchtop.
PERFORMANCE
With a true net air extraction of 510m³/hr net an hour, the more
vigorous styles of cooking, such as pasta boiling, griddle and
stir frying, are catered for. At the touch of the speed control, the
power can be switched down for the gentlest of simmers.
LOW MAINTENANCE
Easy cleaning is a premium with wipe-over 18/10 grade stainless
steel surface. A single lift-out stainless steel and aluminium four-ply
grease filter can be hand washed. The lighting and speed controls
are underslung and forward away from most of the vapour trail
and there is easy access to the twin light globes.
QUIETNESS
44 to 60 dBA. The motor/impellor encasement and internal flue
are smooth-walled to eliminate air drag and noise, hand-finished
welded metal joins for no vibration.
SAFETY
Thermal overload protector or motor; fire-retardant hardened metal
and mesh. VO self-extinguishing polycarbonate for motor housing
and internal flue.
DUCTING
Extracting the air direct to atmosphere ensures the maximum
removal of grease/oil/particle-laden vapour, odours and, very
importantly, the heat, resulting in a cleaner, more comfortable
cooking environment. An internal ducting pipe could, ideally,
continue in a straight line within the decorative flue to the kitchen
roof, then through the roof cavity and exit via a roof cowl.
If the rangehood is mounted against an internal wall, the ducting
could, as effectively, exit at the rear anywhere along the vertical
line of the concealing decorative flue and at a position that is
structurally feasible for an external wall cowl.
RECIRCULATION
When cooking vapours cannot be ducted to the atmosphere, that
is, the rangehood is mounted on an internal wall and/or there is
another storey above, the supplied recirculation panel is inserted
into the telescopic flue
CHARCOAL FILTERS
In the recirculation mode, the rangehood is also sending cooking
odours back into the kitchen. An activated charcoal filter disc can
be fitted to each side of the centrifugal motor (part number for pair
0899801) to effectively diminish the cooking odours. They are
not to be washed and are replaceable.
DUCTED MATERIAL
The smooth internal walls of either galvanised sheetmetal piping
or high temperature resistant PVC will assist in both greater
unobstructed air flow and quieter operation. Flexible ducting can
be considered for the very short run and difficult bends.