Technical Support US: 888-443-2751
Technical Support INTL: 316-943-2751
5
Do not restrict the flow of ventilation air to the unit. Provide adequate clearance for operating,
cleaning, maintaining the unit is in the installed position.
Keep the area free & clear of combustible material. DO NOT SPRAY AEROSOLS IN THE
VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.
Ovens are certified for installation on combustible floors.
Electrical schematics are located inside the control box of the oven & and in this manual. Dis-
connect input power to the unit before performing any maintenance.
This unit requires a ventilation hood. The installation must conform to local codes.
This unit must be operated by the same voltage, phase, & frequency of electrical power as des-
ignated on the nameplate label located on the side of the unit.
Minimum clearances must be maintained from combustible & non-combustible construction
materials.
Follow all local codes when installing this unit.
Follow all local codes to electrically ground the unit.
Appliance is not to be cleaned with high pressure water.
XLT ovens are certified for use in stacks of up to four (4) units of XLT products. Integration
of other manufacturer’s products into an oven stack is not recommended, & voids any warran-
ties. XLT Ovens assumes no liability for mixed product applications.
Failure to call XLT Customer Service at 1-888-443-2751 prior to contacting a repair company
voids any & all warranties.
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE.
This appliance operates below 70 dBA.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable liquids or vapors in
the vicinity of this or any other appliance.
DANGER
WARNING & SAFETY INFORMATION
