XLifter model X2, user guide, ver. 2.0, firmware ver. 1.07
eXpedition tech s.r.o., Těšnov 5, 110 00 Prague 1, Czech Rep., https//www.xlifter.com, [email protected]
Page 4
4.
Installation
4.1.
Package Contents
1x XLifter EAS installation
1x Cable harness with the bypass plug
1x XLifter control module
1x Velcro strip for easy control module installation
1x User manual
1x XLifter sticker
4.2.
Installation - General Description and Overview
The XLifter device consists of 2 main components - the control module and the EAS
installation unit (EAS stands for Electronic Air Suspension). The control module (display unit
with buttons) is used to control all settings and to inform the user of the operating status.
The EAS unit serves to adjust the wheel height sensor signals and vehicle tilt
measurements. Communication of the control module and the EAS unit is wireless.
The control module can be placed anywhere in the interior of the vehicle that allows for
easy accessibility – as per user preference. The control module needs to be connected to an
12V power supply (cigarette lighter socket). Advanced users may cut the power connector
and connect the cable to appropriate 12V junction point. Installation with all cables hidden
will look more aesthetically pleasing and the lighter socket will not be blocked by the
plugged-in unit.
The XLifter EAS unit is installed near the original air suspension control unit and connects
with it via the supplied cable harness. The XLifter EAS unit is mechanically attached to the
body of the vehicle after installation, thus serves also as an accurate tilt sensor.
Please see the XLifter installation video guide before installation!
It is available on YouTube - search for XLifter installation guide:
Discovery 3,4 & Range Rover Sport:
https://youtu.be/gEOBpTRY0O8
Range Rover L322 2007 – 2009:
https://youtu.be/Fz_a2Fp91Gc
Range Rover L322 2010 – 2012:
https://youtu.be/Qq9_o0icBFQ
Guide is also available at Facebook (
https://www.facebook.com/XLifterEAS/
) and
www.xlifter.com
.
Please see Xlifter FAQ (Frequently asked questions):
https://www.xlifter.com/faq/
Quick installation overview in 4 steps
:
1.
Install the XLifter EAS unit
2.
Connect the cable harness.
3.
Plug the control module power to 12V socket..
4.
Set the vehicle type and the Steering position and run the
calibration procedure.
Installation guide in this manual is for Discovery 3, 4 & Range Rover Sport.
Procedure is very similar for the other vehicle types – please see the video guides!
