XITRON 2000I, User Manual

Page: 23 / 96

Charging the Battery 23
Charging Modules
One of these modules is included with the main unit (as specified at the time
of order). Additional charging modules may be obtained using the codes
described below.
“M02000”
This option delivers an additional copy of this user guide. If not included at
the time of placing the order for the basic unit, please have the serial number
of your unit available when making this order.
“MS2000”
This option delivers a full service manual, incorporating schematics,
assembly diagrams, fault diagnosis aids and full servicing information. If not
included at the time of placing the order for the basic unit, please have the
serial number of your unit available when making this order.
“SP48”
A 48” long shielded cable with low thermal spade lugs terminating each lead.
Use this lead sfor applications requiring superior performance at levels below
1ì V.
“PL36”
A 36” long shielded cable with low thermal plugs terminating each lead. This
lead should be used for applications requiring superior performance at levels
below lµV.
“T1”
A wall-mount charger with 120VAC input and 12VDC @ 1.5A minimum
output.
“T5”
A free-standing, universal charger with 85VAC input and 12VDC @ 1.5A
minimum output.