4-2
RealPort CardBus Ethernet 10/100+Modem 56 User’s Guide
Write down the RealPort CardBus Ethernet 10/100+Modem 56
model and serial numbers for reference.
CBEDIAG.EXE For Windows 95, 98, and NT. Found on the
Xircom CD-ROM.
CBETEST.EXE
For MS-DOS and Windows 3.x. Found on the
Xircom CD-ROM.
Executing the Windows 95, 98, and NT Diagnostic
Program
1
Verify that the RealPort CardBus Ethernet 10/100+Modem 56
has been installed and configured to work in your version of
Windows.
2
Insert the Xircom CD-ROM.
3
Select Start, Run,
[path]CBEDIAG.EXE
, where [path] is the
drive containing the Xircom CD-ROM.
4
Navigate through the diagnostic program by clicking the
appropriate tab. When finished, click OK to exit.
Executing the MS-DOS/Windows 3.x Diagnostic Program
CBETEST can only be run from the MS-DOS command line. It
cannot be run from a DOS box within Windows.
1
Install the RealPort CardBus Ethernet 10/100+Modem 56
according to the instructions contained in
Chapter 1. Hard-
ware Installation
.
2
Power down and restart the computer from MS-DOS. DO NOT
load a network driver.
3
Run the diagnostic test by typing
[path]CBETEST
at the MS-
DOS prompt, where [path] is the drive containing the Xircom
CD-ROM, then press Enter.