manualshive.com logo in svg

Xircom RealPort CardBus Ethernet 10/100 + Modem 56, User Manual

Share
Download
Xircom RealPort CardBus Ethernet 10/100 + Modem 56 User Manual Download Page 10

2-2

 RealPort CardBus Ethernet 10/100+Modem 56 User’s Guide

Installing under Windows 95 OSR2 and 98

Notes on Installation under Windows 95 OSR2 and Later

Windows 95 OSR2 (version 950b) and later has limited support for
CardBus multifunction (LAN+modem) devices. The RealPort
CardBus Ethernet 10/100+Modem 56 includes Xircom software
which enhances support for CardBus multifunction devices. See
the README file on the Xircom CD-ROM for additional informa-
tion on this software and for complete details on installation
under OSR2.

Prompt for Updated Files

During installation, the Xircom software may display a message
stating that certain Windows 95 VXD files need to be updated. See
the README file on the Xircom CD-ROM for additional informa-
tion on these files.

COM Port Assignment under Windows 95 and 98

COM5 is automatically assigned to the modem when the RealPort
CardBus Ethernet 10/100+Modem 56 is installed under Windows
95 or 98. TAPI-compatible Windows applications support the
COM5 setting. For applications that do not support COM5, you
can change the COM port assignment by running SETUP.EXE after
installation, then running the Xircom COM Port Selector from the
Xircom Utilities program group.

How to Create Floppy Disks for Software Installation

To create a set of floppy disks for use in installation, as an
alternative to using the Xircom CD-ROM, run MAKEDISK.BAT
from the Xircom CD-ROM to copy the required installation files to
two blank floppy disks.

Installing the RealPort CardBus Integrated PC Card

1

With Windows running, insert the RealPort CardBus Ethernet

10/100+Modem 56 into the CardBus PC Card slot and connect
cables as shown in 

Chapter 1. Hardware Installation

.

Proceed to step 2.

Summary of Contents for RealPort CardBus Ethernet 10/100 + Modem 56













































Reviews:

No comments

Brands by name

Popular brands

Load more brands