Windows 95 and 98 Installation
2-3
Plug and Play Installation (Versions 950b and later)
2
When Windows displays the New Hardware Found window,
type the path to the Xircom CD-ROM and follow the instruc-
tions on the screen to complete the installation. Xircom files will
be copied from the Xircom CD-ROM and network and modem
functionality will be installed. If prompted again for network
drivers, type the path to the Xircom CD-ROM and click OK.
If you are using Windows 95 and the New Hardware Found
window does not appear, you are probably using Windows
95 version 950 or 950a. For the latest information on support
for Windows 95 versions 950/950a, see the README file on
the Xircom CD-ROM.
3
After installation, select No if prompted to reboot. Proceed to
step 4.
Xircom Utilities
4
Use Start/Run to execute A:\SETUP.EXE from the Xircom
diskette. Xircom utilities and online documentation will be
installed in a program group on your hard drive.
5
When prompted to reboot, choose Yes. After the computer
restarts and Windows reloads, Xircom CountrySelect and
online registration software will launch. Make a country
selection (U.S.A. is the default) and complete the registration.
Troubleshooting Modem Installation
Review this section if any of the following problems occur:
• Modem initialization errors occur when attempting to dial-
out using a communications application.
• Connection fails or other problems occur.
It may be necessary to define a modem type within your commu-
nications application. If the Xircom modem is not listed, choose a
“Generic Hayes compatible” device.
