background image

CHAPTER 3

Windows NT 4.0 Installation

The RealPort CardBus Ethernet 10/100+Modem 56 supports
manual installation under Microsoft Windows NT 4.0. Plug and
Play installation and hot swapping of CardBus adapters are not
directly supported by Windows NT.

Drivers Available

The following drivers for Windows NT can be found on the
Xircom CD-ROM:

• CBE.SYS - NDIS3 driver

• CBEN4.SYS - NDIS4 driver

• CBMODEM.SYS - modem enabler

The NDIS3 driver CBE.SYS is installed by default using the
procedures in this chapter. For NDIS4 instructions, see the
README file on the Xircom CD-ROM.

For the latest information on CardBus support in Windows
NT, review the README file on the Xircom CD-ROM.

Installing under NT 4.0

1

Insert the RealPort CardBus Ethernet 10/100+Modem 56 into

the CardBus PC Card slot, as described in 

Chapter 1. Hard-

ware Installation

.

2

With the RealPort CardBus Ethernet 10/100+Modem 56 in the

PC Card slot, click Start, click Settings, and select the Control
Panel. The Control Panel opens.

3

Double-click the Network icon. The Network Settings window

opens.

Summary of Contents for RealPort CardBus Ethernet 10/100 + Modem 56













































Reviews: