Xip NVR04 LION User Manual Download Page 52

Page: 52 / 67

NVR User

’s Manual

5.2.2.2

Software Upgrades

If a new version of the remote monitoring software is available on the NVR,

upgrade will be prompted while accessing the unit. Follow the steps to

upgrade the software.



The message as the above figure will be prompted. Click on <Yes> to

accept version upgrade.



Start the IE again and enter the IP address of the NVR in the Address bar

of the browser. Or if the IP address of the NVR i s set as a Favorite site,

click the Favorites entry for the unit.



When the software is completely downloaded and installed, the Login

Screen will be displayed.

5.3

Basic Operation for Monitoring Remotely

When an NVR is successfully connected, the main window of the remote

monitoring software will be displayed. Please refer to the

Setup Guide

for the

graphical illustration of functional items.

The functions on the remote monitoring software will be described in the

following sections.

5.3.1

View Live Video

View live video from the cameras connected to the NVR by clicking <Live>

button on the main window toolbar. Choose a desired display mode

–

full-screen, 4-window, or 9-window

– after the live images of the NVR are

displayed on the main window. When a dome camera is connected and

viewed in single channel full-screen mode, the PTZ Control operation can be

accessed. To choose desired display mode and to operate dome camera

control, refer to the following subsections.

Summary of Contents for NVR04 LION




































































Search results

Summary of Contents for NVR04 LION

Reviews:

Related manuals for NVR04 LION

Brands by name

Popular brands

Xip NVR04 LION, User Manual

Search results

Summary of Contents for NVR04 LION

Reviews:

Related manuals for NVR04 LION

Brands by name

Popular brands