NVR User
’s Manual
43
4.4.4
Run Dome Camera Tour
Users can also run dome camera tour setup at the dome camera side. Follow
the steps to run the dome camera tour.
Click on a dome camera channel to display it in full-screen .
Then click on the PTZ Control icon and the PTZ Control panel will be
displayed.
Click on the Preset button on the PTZ Control panel to access the Set/Go
Preset function. A numeral keyboard will be displayed.
Click on the <Run Tour> button to run the dome camera tour.
Click on any Direction buttons to end the dome camera tour.
4.5
UPnP Function
UPnP is the abbreviation for Universal Plug and Play, which is a technology
that integrates a universal protocol for widespread plug-and-play devices to
ease the network implementation. When a PC and a NVR both installed the
UPnP function, the PC can automatically recognize the NVR in the same local
area network.
The advantage of this function is that PCs can connect to the NVR via the
remote control software by directly clicking on the icon representing the NVR
in <
My Network Places
>
folder.
4.5.1
Setting Up the NVR and the PC
Enable the UPnP function in the NVR:
Enter the OSD setup menu with proper account and access <System>
<Network Setup>
<UPnP Setup>. The menu is as the following:
UPnP Setup
UPnP
UPnP NAT Traversal
On
No
Set the first item UPnP to <On> and the NVR is ready.
