NVR User
’s Manual
49
5.2.2
Install Remote Monitoring Software
With the IP address of the NVR, the next step is to install the remote
monitoring software via connecting to the NVR. Follow the steps below.
Enter the IP address of the NVR in the address bar at the top of the
browser. The IP address of the NVR can be saved as a Favorites item in
the web browser to enable easy access in the future.
The ActiveX controls and plug-ins dialog will show twice for confirmation.
Click on <Yes> to accept installation of the ActiveX plug-ins. The remote
monitoring software plug-ins will be downloaded and installed on the PC
automatically.
NOTE:
Do not input any leading
“0” characters in the address. For
example,
“192.068.080.006” should be input as “192.68.80.6”. If
the default trigger port 80 is changed to a different number, such as
port 81, the IP address should be input as
“192.68.80.6:81”.
A version check starts to verify whether the remote monitoring software
was installed already, and also checks if the version is the same as what is
stored in the connecting NVR. This process may take up to 30 seconds.
When the software is completely downloaded and installed, the Login
dialog will be displayed.
