NVR User
’s Manual
50
5.2.2.1
Log in/Log off
Login using the same accounts setup in the NVR. The accounts
’ authority
level is also the same as what was setup in the NVR.
One preset account
“admin” and up to two other accounts can access a NVR
at the same time. However, if the
“admin” account is currently accessing the
NVR
’s OSD setup menu at the NVR side, then the “admin” account at the
remote monitoring site cannot change the settings at the same time. The
“admin” account at the NVR side has priority.
The following steps demonstrate procedures to connect and login to the NVR.
Start the remote monitoring software by entering the IP Address of the
NVR in the Address bar of the browser. Alternatively, click on the Favorite
entry for the unit (if the IP address of the unit has been set).
Input username and password of the account. The login username and
password can be saved to ease future login. The default username and
password is
“
admin
” and
“
1234
”.
Click <OK> to log in to the NVR. The process may take a few seconds.
If the connection is made successfully, the main window will display live
video of the connected cameras.
If the IE browser is closed, the remote system is logout and disconnected
from the NVR at the same time.
