26
◼
Terminal block dimension Unit: mm
109.0
42.1
45.0
◼
Wiring method
When wiring, press the spring switch with screw driver, insert the wire into the corresponding hole, and release
the spring switch. The terminal block requires that the stripped length of the conductor is 1.5cm.
◼
Installation
The terminal block shall be installed on a 35mm wide guide rail.
(2)
Connection cable
Connecting cables shall be used in conjunction with external terminal blocks. Xinje provides JC-G26-NN05,
JC-G26-NN10, JC-G26-NN15 cables of different lengths and specifications for users to choose. Please note that
when connecting, one end of the model wrapped by a transparent heat shrinkable tube is connected to XS, and
the other end is connected to the terminal block. Do not reverse the connection!!!
The connection diagram is as follows:
module
transparent heat shrinkable tube
terminal block
Note:
When connecting with the terminal block, please pay attention to the slot position of the terminal block, and do
not reverse the connection.
