Xinje XS Series, User Manual

Page: 24 / 57

14
(1): Input terminal, power supply input
(2): Input label
(3): RJ45 port 1
(4): RJ45 port 2
(5): Output label
(6): RS232 port (COM1)
(7): Output terminal, RS485 port (COM2)
(8): Input action indicator
(9): System indicator
PWR: power supply indicator
RUN: run indicator
ERR: error indicator
(10): Expansion module interface
(11): Installation hole (2 holes)
(12): Output action indicator
Model Description
XL-E4WT-D 4 channels pressure measurement, 0~10mV, 22-bit conversion
precision
1-3
．
Part introduction
1-3-1
．
XSDH series structure composition
X
Y
XSDH-60A32-E
ERR
RUN
PWR
（12）
（11）
（10）
（13）
（7）
（6）
（5）
（3）
（4）
（15）
（9）
（8）
（2）
（1）
（14）
（16）
（17）
The names of each part are as follows:
Note: the dial switch at location (15):
DIP1 DIP2 Function
OFF OFF Start PLC normally and use it normally
OFF ON The user program is not loaded when the power is on. After the user downloads the empty
program, turn the DIP2 to the off state and then power on the PLC again
ON OFF Initialize the IP to 192.168.6.6 (it takes effect after the PLC is powered on again)
(13): Guide rail mounting hook (2 hooks)
(14): Vacant
(15): Dial switch
(16): Product label
(17): Vacant