Twin WAN Series – User Guide | v1
NOTE: To utilize the VPN Failover feature, you must have either a XC-DPG603 or 503
on both ends of the tunnel. A combination of either can also be used. To utilize the VPN
Aggregation feature, you must have an XC-DPG603 on both ends of the tunnel. The 603
supports VPN Aggregation and VPN Failover simultaneously.
Figure 18. IKE Global Settings Console
IKE Global Setting - Settings & Descriptions
Global Parameters
The Global Parameters section allows you to define your Phase 1 VPN configuration and
some Phase 2. This is the Global configuration for all policies created. It is recommended
for novice users to use the default configuration. If these settings do not match the remote
side Phase 1 will not connect.
Enable -
This field is used to enable the VPN function. For standard VPN you may enable
one of the WAN ports or both. Both boxes must be enabled to utilize the
advanced functions such as VPN Aggregation or VPN Failover.
ISAkmp Port -
This is the VPN listening port. IPSec by default uses port 500. You can set this
parameter use a port that is different than 500. The remote IPsec endpoint must
attempt to connect on the set port, otherwise the connection cannot be made.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
58
