XiNCOM Twin WAN XC-DPG502 User Manual Download Page 103

Page: 103 / 108

Twin WAN Series – User Guide | v1

Appendix B: Windows TCP/IP Setup

TCP/IP Settings

If using the default Twin WAN Gateway settings, and the default Windows
95/98/ME/2000 TCP/IP settings, no changes need to be made.

•

By default, the Twin WAN Gateway will act as a DHCP Server and automatically
provide a suitable IP Address (and related information) to each PC when the PC
boots.

•

For all non-Server versions of Windows, the default TCP/IP setting is to act as a
DHCP client.

•

If you wish to check your TCP/IP settings, the procedure is described in the
following sections.

•

If your LAN has a Router, the LAN Administrator must re-configure the Router
itself. Refer to

Chapter 3 – Advanced LAN Setup

for details.

102

Summary of Contents for Twin WAN XC-DPG502













































































































Search results

Summary of Contents for Twin WAN XC-DPG502

Reviews:

Related manuals for Twin WAN XC-DPG502

Brands by name

Popular brands

XiNCOM Twin WAN XC-DPG502, User Manual

Search results

Summary of Contents for Twin WAN XC-DPG502

Reviews:

Related manuals for Twin WAN XC-DPG502

Brands by name

Popular brands