Twin WAN Series – User Guide | v1
Figure 7
Load Balance Console - Settings
Load Balance Configuration
•
Enable
– Use this to enable your Load Balance settings.
•
Balance Type
– Select the desired Balance Type:
¾
Bytes rx+tx – Traffic is measured by Bytes.
¾
Packets rx+tx – Traffic is measured by Packets.
¾
Sessions established – Traffic is measured by Sessions.
¾
IP Addresses – Traffic is measured by IP Addresses
•
Loading Share on WAN 1
– Enter the percentage (%) of traffic to be sent over
WAN 1. The WAN port with the greater bandwidth should be given a higher
percentage of traffic over the other WAN port.
Click the
Update
button to save your changes.
NAT Statistics
This section displays the current traffic data of WAN 1 and WAN 2. You can use this
information to help you “fine-tune” the settings above.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
25