Twin WAN Series – User Guide | v1
Primary Setup - Settings & Descriptions
Connection Mode
•
Enable
- Select this if you have connected a broadband modem to this port.
•
Disable
- Select this if there is no broadband modem connected to this port.
•
Backup
- When selecting a connection for Backup mode, the status of that
connection will stay disconnected until the primary connection fails.
Connection Type
Check the requirements supplied by your ISP, and select the appropriate option.
•
Static IP
- Select this if your ISP has provided a Fixed or Static IP address. Then
enter the data into the Address Info fields.
•
Dynamic IP
- Select this if your ISP provides an IP address automatically, when
you connect. You can ignore the Address Info fields.
•
PPPoE
- Select this if your ISP uses this method (PPPoE software that is usually
provided by your ISP is not required to be used when selecting this method). If
this method is selected, you must complete the PPPoE dialup fields.
Address Info
This is for Static IP users only. Enter the address information provided by your ISP. If
your ISP provided multiple IP address, you can use the Multi-DMZ screen to assign the
additional IP addresses.
PPPoE / PPTP Dialup
This is for PPPoE and PPTP users only.
1.
Enter the Username and Password provided by your ISP.
2.
If using PPTP, enable the PPTP Connection checkbox and enter the IP address of
the PPTP server.
3.
Host name (Optional For PPPoE) - This field is used by a Host to uniquely
associate an access concentrator to a particular Host request.
Note: If using the PPTP connection method, select Static IP or Dynamic IP to correspond
to the IP address method used by your ISP.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
16
