Xilinx VIODC User Manual Download Page 43 | Manualshive

Page: 43 / 68

background image

Video Input/Output Daughter Card

43

UG235 (v1.2.1) October 31, 2007

R

Chapter 6

SDI Interface

Introduction

This chapter describes how the demo is implemented. More detailed descriptions of how
to implement SD-SDI and HD-SDI transmitters and receivers can be found in Xilinx
application notes,

,

, and various other SDI-related Xilinx

application notes. (The VSK is a demonstration platform only. For HD-SDI verification and
compliance, Xilinx recommends using the

Cook Technologies SDV board

This chapter demonstrates the use of the SDI interfaces on the VIODC in both SD-SDI and
HD-SDI modes and provides a basic demonstration of how to implement the SDI receiver
and transmitter interface. The code provided

can easily be modified to send the video

received by the SDI receiver to different video interfaces or to the ML402 board for further
processing. Likewise, the code can be modified so that the video source for the SDI
transmitter comes from other video sources other than the internal video pattern
generators.

The chapter also demonstrates how to use the ADV7321B video encoder device to convert
digital video received by the SDI receiver into analog video. A PicoBlaze™ processor is
used to control the ADV7321B video encoder through the I2C interface. The PicoBlaze
processor code includes an interactive debugger allowing registers in the ADV7321B to be
read or written through a ChipScope™ video input and output (VIO) console.

Reference Clocks

The source of reference clocks for the SDI transmitter and receiver is a combination of a
voltage controlled crystal oscillator (VCXO) (PLL502) and a frequency synthesizer
(ICS664-02).

The PLL502 VCXO is based on a 13.5 MHz crystal. The VCXO can multiply this crystal
frequency by various multipliers. The control voltage for the VCXO comes from a Digital-
to-Analog Converter (DAC). The DAC is controlled by the FPGA. In this demo, the DAC
outputs a fixed voltage at about the 1.65 V.

The output of the VCXO is connected to the clock input of the ICS664-02 frequency
synthesizer. The ICS664-02 can generate various different frequencies from the reference
clock frequency supplied by the VCXO.

The RocketIO™ transceiver used in the SDI receiver needs three different clock
frequencies: 74.25 MHz (to receive 1.485 Gb/s HD-SDI), 74.1758 MHz (to receive
1.4835 Gb/s HD-SDI), and 108 MHz (to receive 270 Mb/s SD-SDI). In the transmitter
section, the RocketIO transceiver also needs three clock frequencies: 74.25 MHz,
74.1758 MHz, and 54 MHz.

(1)

www.BDTIC.com/XILINX

«
...
41
42
43
44
45
...
»

Summary of Contents for VIODC





































































Reviews:

No comments

Related manuals for VIODC

Brand: Cabletron Systems Pages: 21

Brand: Rane Pages: 4

Brand: 3Com Pages: 16

F-ZTAT H8/3048 Series

Brand: Renesas Pages: 34

PoleVault System A/V Source Inputs

Brand: Extron electronics Pages: 4

Brand: Aaeon Pages: 61

Brand: HMS Pages: 18

PCI-AD-x16HE-BG4

Brand: Serial Cables Pages: 18

SNMP-1000-E2B1E

Brand: Advantech Pages: 4

Brand: Omron Pages: 4

Brand: Lattice Semiconductor Pages: 25

Brand: JCAT Pages: 2

Brand: netsys Pages: 38

Brand: Aaeon Pages: 22

Brand: AA WIRELESS Pages: 55

Brand: Datacom Pages: 45

Brand: GE Pages: 24

IS200ADIIH A Series

Brand: GE Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands