Xilinx VIODC User Manual Download Page 2 | Manualshive

Page: 2 / 68

background image

Video Input/Output Daughter Card

UG235 (v1.2.1) October 31, 2007

Xilinx is disclosing this user guide, manual, release note, and/or specification (the "Documentation") to you solely for use in the development
of designs to operate with Xilinx hardware devices. You may not reproduce, distribute, republish, download, display, post, or transmit the
Documentation in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written consent of Xilinx. Xilinx expressly disclaims any liability arising out of your use of the Documentation. Xilinx reserves
the right, at its sole discretion, to change the Documentation without notice at any time. Xilinx assumes no obligation to correct any errors
contained in the Documentation, or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with
technical support or assistance that may be provided to you in connection with the Information.

THE DOCUMENTATION IS DISCLOSED TO YOU “AS-IS” WITH NO WARRANTY OF ANY KIND. XILINX MAKES NO OTHER
WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, REGARDING THE DOCUMENTATION, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT OF THIRD-PARTY
RIGHTS. IN NO EVENT WILL XILINX BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, EXEMPLARY, SPECIAL, OR INCIDENTAL
DAMAGES, INCLUDING ANY LOSS OF DATA OR LOST PROFITS, ARISING FROM YOUR USE OF THE DOCUMENTATION.

© 2006–2007 Xilinx, Inc. All rights reserved.

XILINX, the Xilinx logo, the Brand Window, and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks
are the property of their respective owners.

Revision History

Video Input/Output Daughter Card
UG235 (v1.2.1) October 31, 2007

The following table shows the revision history for this document.

R

Version

Revision

01/25/06

1.0

Initial Xilinx release.

02/13/06

1.1

Added two sentences to pages 17 and 43.

02/23/07

1.2

Corrected 3 pins and column 6 heading in Table A-2.

10/31/07

1.2.1

Defined the following acronyms on p. 48: EAV, CRC, NTSC, and PAL.

www.BDTIC.com/XILINX

«
1
2
3
4
...
»

Summary of Contents for VIODC





































































Reviews:

No comments

Related manuals for VIODC

tBOX330-870-FL Series

Brand: AXIOMTEK Pages: 2

Brand: Funkwerk Pages: 2

Brand: Zoom Pages: 48

Brand: Cypress Semiconductor Pages: 16

SmartMesh IA-510 D2511

Brand: Dust Networks Pages: 30

OP-8000-EDFA-1U Series

Brand: Optostar Pages: 9

Brand: Compro Technology Pages: 2

Brand: INNOSILICON Pages: 11

Brand: NZXT Pages: 2

Wireless Outdoor Bridge XI-1500-IH

Brand: IMC Networks Pages: 13

Brand: Z3 Technology Pages: 83

Brand: Arctic Pages: 7

NexXxoS GPX-N 970 M03

Brand: Alphacool Pages: 2

Brand: Paradyne Pages: 10

VDA-NVR2108W4KS2

Brand: Dahua Technology Pages: 363

IQ Switch IQS128

Brand: Azoteq Pages: 4

Brand: Orcomm Pages: 10

Brand: Z3 Technology Pages: 94

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands