Xilinx ML605, Hardware Tutorial

Page: 40 / 40

40 www.xilinx.com ML605/SP605 Hardware Tutorial
UG669 (v3.0) March 15, 2011
Summary
Summary
Tasks accomplished in this tutorial:
• Loading and executing a design from a pre-built bitstream and ELF
• Rebuilding a design
• Adding IP from the Xilinx IP catalog to an embedded system
• Adding user IP to an embedded system
Next Steps
References
1. UG683 , EDK Concepts, Tools, and Techniques
2. UG668, Getting Started with the Virtex-6 FPGA ML605 Embedded Kit
3. DS668, AXI Interface Based ML605 Embedded Kit MicroBlaze Processor Subsystem Data
Sheet
4. UG667, Getting Started with the Spartan-6 FPGA SP605 Embedded Kit
5. DS667, AXI Interface Based SP605 Embedded Kit MicroBlaze Processor Subsystem Data
Sheet
6. UG111 , Embedded System Tools Reference Manual EDK 13.1, Chapter 9, Xilinx
Microprocessor Debugger (XMD)
7. UG670, AXI Interface Based ML605/SP605 MicroBlaze Processor Subsystem Software
Tutorial
8. UG029 , ChipScope Pro 13.1 Software and Cores User Guide
9. UG534 , ML605 Hardware User Guide
10. UG526 , SP605 Hardware User Guide
11. UG081 , MicroBlaze Processor Reference Guide EDK 13.1
Note:
UG667 and, DS667, are provided in the
ML605_Embedded_Kit\Documentation
directory. UG668 and, DS668, are provided in the
SP605_Embedded_Kit\Documentation
directory
Next Step Refer To
Develop the Software Platform UG670, AXI Interface Based ML605/SP605 MicroBlaze Processor Subsystem Software
Tutorial [Ref 7]
Advanced Debugging UG029, ChipScope Pro Software and Cores User Guide [Ref 8] and UG111, Embedded
System Tools Reference Manual EDK 12.3, Chapter 9 [Ref 6]
Simulate the Embedded System UG683, EDK Concepts, Tools, and Techniques [Ref 1]