manualshive.com logo in svg

Xilinx Kria KV260, User Manual

Share
Download
Xilinx Kria KV260 User Manual Download Page 2

Table of Contents

Chapter 1: Summary

..................................................................................................... 4

What's in the Box?...................................................................................................................... 5
Interfaces..................................................................................................................................... 6

Chapter 2: Initial Setup

............................................................................................... 9

Powering the Starter Kit and Power Budgets..........................................................................9
Fan and Heat Sink..................................................................................................................... 10

Chapter 3: Boot Devices and Firmware Overview

......................................11

Primary Boot Device................................................................................................................. 13
Secondary Boot Device.............................................................................................................13

Chapter 4: Software Getting Started

................................................................. 14

Platform Management Utility.................................................................................................. 14
Accelerated Applications.......................................................................................................... 15
Accelerated Application Package Selection........................................................................... 15
Supported Peripherals..............................................................................................................16

Chapter 5: Xilinx Tools Integration

.....................................................................17

Vitis Platforms............................................................................................................................17
Vivado Board Flow.....................................................................................................................18

Chapter 6: Board Reset, Firmware Update, and Recovery

.................... 19

Board Reset................................................................................................................................19
Firmware Update.......................................................................................................................21
Ethernet Recovery Tool.............................................................................................................21
Boot Firmware A/B Update...................................................................................................... 22

Appendix A: Additional Resources and Legal Notices

............................. 24

Xilinx Resources.........................................................................................................................24
Documentation Navigator and Design Hubs.........................................................................24
References..................................................................................................................................24

UG1089 (v1.2) July 26, 2022

 

www.xilinx.com

KV260 Starter Kit

 2

Send Feedback

Summary of Contents for Kria KV260



























Reviews:

No comments

Brands by name

Popular brands

Load more brands