manualshive.com logo in svg

Xilinx Kria KV260, User Manual

Share
Download
Xilinx Kria KV260 User Manual Download Page 17

Chapter 5

Xilinx Tools Integration

The K26LTD SOM and KV260 Starter Kit are integrated with the Vitis™ software development
platform and Vivado

®

 Design Suite for rapid development of your unique applications on the

platform.

Vitis Platforms

Vitis base platforms are available in the 

kv260-vitis

 GitHub repository. For the KV260 Starter Kit,

the following Vitis base platforms are available. Because additional KV260 base platforms are
added and updated over time, be sure to reference the repository for the most up to date list of
platforms before starting your design work.

• kv260_ispMipiRx_vcu_DP: 

• Video capture using the IAS ISP MIPI interface for a AR1335 sensor module configuration

• Display using standard DisplayPort and/or HDMI™

• Audio transmit and receive (I2S) via PMOD audio codec

• Video codec unit (VCU) encode/decode and one stream encode buffer

• Support for 4k30 and 1080p30 in NV12 video formats

• kv260_vcuDecode_vmixDP: 

• VCU decode of four input streams

• Display using video mixer (VMIX) to DisplayPort and/or HDMI for 2x2 display

configuration

• Resolution support for 1080p30 for each stream

• kv260_ispMipiRx_vmixDP: 

• Video capture using the IAS ISP MIPI interface for a AR0144 sensor module configuration

• VCU decoding of four streams

• Display using video mixer (VMIX) to DisplayPort and/or HDMI for 2x2 display

configuration

Chapter 5: Xilinx Tools Integration

UG1089 (v1.2) July 26, 2022

 

www.xilinx.com

KV260 Starter Kit

 17

Send Feedback

Summary of Contents for Kria KV260



























Reviews:

No comments

Brands by name

Popular brands

Load more brands