AMS101 Evaluation Card User Guide
www.xilinx.com
51
UG886 (v1.3) November 6, 2013
Appendix B
Required Jumper Settings for Base
Boards
Jumper Settings for the KC705 Board
Note:
The triangle indicates pin 1 for jumper settings on all Xilinx base boards.
To enable AMS evaluation, ensure the KC705 board has the following jumper settings:
•
J43: In place
•
J68: In place
•
J48: In place between pins 2 and 3
•
J69: In place between pins 1 and 2
•
J47: In place between pins 1 and 2
•
J42: Not in place
See
KC705 Evaluation Board for the Kintex-7 FPGA User Guide
(UG810)
[Ref 7]
.
Jumper Settings for the VC707 Board
To enable AMS evaluation, ensure the VC707 board has the following jumper settings:
•
J10: In place
•
J53: In place
•
J43: In place between pins 2 and 3
•
J54: In place between pins 1 and 2
•
J42: In place between pins 1 and 2
•
J9: Not in place
See
VC707 Evaluation Board for the Virtex-7 FPGA User Guide
(UG885)
[Ref 8]
.
Jumper Settings for the ZC702 Board
To enable AMS evaluation, ensure the ZC702 board has the following jumper settings:
•
J8: Not in place
•
J9: In place
•
J65: In place
•
J37: In place between pins 1 and 2
•
J38: In place between pins 2 and 3
