UG886 (v1.3) November 6, 2013
www.xilinx.com
AMS101 Evaluation Card User Guide
02/14/2013
1.2
Chapter 1, AMS101 Evaluation Card Overview
: Instances of
AMS101
evaluator tool
were corrected to
AMS
evaluator tool. Added part HW-AMS101-G. Reference design
files are now downloaded from
www.xilinx.com/support/documentation/ams101_evaluation_card.htm
. The AC701
board is now supported. The bullet with “
AMS evaluator tool graphical user
interface” was removed from section
AMS101 Evaluation Card, page 7
. Download
information for the AMS evaluator tool graphical user interface is listed in the last
bullet on
page 7
and the bullet about “FPGA programming files...” was removed.
Chapter 2, AMS101 Evaluation Card Quick Start
: The onboard
signal source is from a
16-bit dual DAC,
page 11
. In
step 1, page 12
, download information changed. In
step 7, page 16
, the AC701 kit and kit documentation references were added.
Various changes were added to
step 9, page 18
. Added section
Power Monitoring
with XADC on AC701, page 24
.
Chapter 4, AMS Evaluator Tool
: Decimation information and
Table 4-2
were added on
page 44
.
Appendix A, Targeted Design Platforms, Schematics, and Dynamic Performance Metric
Calculation Methodology
: AC701 was added to the
Supported Targeted Design
Platforms
section.
Appendix B, Required Jumper Settings for Base Boards
: Added
Jumper Settings for the
AC701 Board, page 52
.
11/06/2013
1.3
Updated for Vivado® Design Suite 2013.3. Procedures in
step 7, page 16
were revised for
the Vivado tool and the KC705 ZIP file name changed. Support for Zynq®-7000 ZC706
AP SoC was added in
Jumper Settings for the ZC706 Board, page 52
. Updated
Appendix C, Additional Resources
links. The link to the
Declaration of Conformity,
page 55
was updated.
Date
Version
Revision