AMS101 Evaluation Card User Guide
www.xilinx.com
35
UG886 (v1.3) November 6, 2013
Board Setup
Jumpers J3 and J5 should both be set between positions 2-3 to disconnect the DAC outputs
and enable the external signal connections at J2 and J6 (pins 1 for both J2 and J6). See
Figure 3-8
.
X-Ref Target - Figure 3-8
Figure 3-8:
Use Case 3 Jumper Configurations: Differential External Analog Source
Jumper J3
Jumper J6
3
2
1
1
2
Jumper J5
Apply Positive Analog
Input Signal to Pin 1
Triangle Near Jumpers Indicates Pin 1
Black Filled Boxes Indicate Jumper Position
Ground
UG886_c3_08_081612
1
2
Apply Negative Analog
Input Signal to Pin 1
Ground
Jumper J2
3
2
1
