Xiamen Hanin Electronic BIMP B4d Series, User Manual

Page: 20 / 63

20
3.3 Peripherals Connection
3.3.1 Interface Cable Connection
1.The standard for the printer’s interface cable shows as follows:
-
USB A-Type cable
- USB B-Type cable
- RS-232C cable
- RJ45 cable
2.Based on your own need, follow the instructions to connect the cable.
1)
Make sure the printer’s power is off.
2) Please plug in the cables.
-Insert the USB A-Type cable into the USB(type A) interface.
-Insert the USB B-Type cable into the USB(type B) interface.
-Insert the RS-232C cable into the serial interface.
-Insert the RJ45 cable into the ethernet interface.
3.3.2 Bluetooth Connection
PDA with Bluetooth interface, laptop and other information terminals can drive the printer.
Instructions show as follows:
1.
Power on the printer.
2. Primary device searches for outer Bluetooth devices.
3. If there are other Bluetooth devices, select the printer’s name.
4. Finish pairing.
If you need more detailed information of pairing methods, please refer to the instructions
of Bluetooth device.
After pairing, primary devices with virtual Bluetooth interface (smart phone, tablet, pocket
PC, palm, notebook) can drive the printer to print labels through virtual Bluetooth interface.
Note : The original code is 1234.