XFX MCP55, Installation Manual

Page: 43 / 57

HT CPU <-> nForce SPP
The voltage of the HT between the CPU and the nForce SPP chip.
+Vbat
The voltage of +Vbat.
Fan Speed values
CPU Fan Speed
The CPU fan speed.
MCP Fan Speed
The MCP fan speed.
Sys Fan Speed
The system fan speed.
Load Defaults
The BIOS defaults sets the basic system functions that ensure system stability. If your computer cannot
POST properly, you should load the Defaults to restore the original settings.
Set Password
The password can be used to start the system or modify the CMOS settings. When you select the Set
Password option, the following message will appear in the center of the screen:
Enter Password:
Enter your password, not exceeding 8 characters, then press <Enter>. The password you enter will re-
place any previous password. When prompted, key in the new password and press <Enter>. If you do
not want to set a password, just press <Enter> when prompted to enter a password, and in the screen the
following message will appear. If no password is keyed in, any user can enter the system and view/
modify the CMOS settings.
Password Disabled!!!
Press any key to continue …
Set User Name
Set the name that will appear on the POST welcome screen.
41
Chapter 3: BIOS Setup