IDE Function Setup [Press Enter]
Use this menu to setup the data flow control for IDE.
RAID Config [Press Enter]
Use this menu to enable or disable SATA RAID.
USB Config [Press Enter]
Use this menu to setup USB interface.
MAC Config [Press Enter]
Use this menu to turn off MAC.
IEEE 1394 controller [Auto] by Default
Use this setting to set whether the IEEE 1394 function is enabled.
HD Audio [Auto] by Default
Use this setting to configure HD Audio.
IDE HDD Block Mode [Enable] by Default
Use this setting to configure HDD Block Mode.
Onboard FDC Controller [Enable] by Default
This option is used to set whether the Onboard FDC Controller is enabled.
Onboard Serial Port 1 [3F8/IRQ4] by Default
This option is used to assign the I/O address and IRQ for onboard serial port 1.
36
Chapter 3: BIOS Setup
Summary of Contents for MCP55
Page 1: ...XFX Motherboard Installation Manual Version 1 0...
Page 57: ......
