Installing DDR2 Memory
Warning:
Make sure your power supply is turned off and disconnect the power cable from the electrical
outlet before inserting or removing the memory module. Failure to turn off the power supply
may result
in serious
damage to your system and/or memory module.
To install memory module:
1. Unlock a DIMM slot by pressing the retaining clip out-
ward.
2. Align the memory module to the DIMM slot by matching up with the notch on memory to the break
on the DIMM slot. Insert vertically into the DIMM slot.
3. If the memory module is insert properly, the retaining clips on both sides will automatically lock on to
the memory module.
Removing a memory module
To remove a memory module:
1. Simultaneously press the retaining clips outward to
unlock the memory module.
2. Remove the memory module.
2
Unlocked retaining clip
1
DDR2 DIMM notch
1
1
1
2
DDR2 DIMM notch
128 pins
112 pins
Chapter 2: Installation Instructions
14
Summary of Contents for MCP55
Page 1: ...XFX Motherboard Installation Manual Version 1 0...
Page 57: ......
