background image

FusionServer CH242 V5 Compute Node 
Technical White Paper 

5 Hardware Description 

 

2022-08-12 

29 

 

Table 5-8

 

NVMe drive indicators (VMD disabled) 

Activity Indicator 
(Green) 

Fault Indicator 
(Yellow) 

Description 

Off 

Off 

The NVMe drive cannot be detected. 

Steady on 

Off 

The NVMe drive is working properly. 

Blinking at 2 Hz 

Off 

Data is being read from or written to the 
NVMe drive. 

Off 

Blinking at 2 Hz 

The NVMe drive is being located or 
hot-swapped. 

Off 

Blinking at 0.5 Hz 

The hot removal process is complete, and 
the NVMe drive is removable. 

Steady on/Off 

Steady on 

The NVMe drive is faulty. 

 

5.4.4 RAID Controller Card 

The RAID controller card supports RAID configuration, RAID level migration, and drive 
roaming. 

 

Contact your local sales representative or use the 

Compatibility Checker

 to determine the 

components to be used. 

 

For details about the RAID controller card, see 

V5 Server RAID Controller Card User 

Guide

. 

5.5 Network 

5.5.1 LOMs 

The LOM is a network interface module (X722) integrated in the PCH. It can be connected to 
an I/O module (switch module). The LOM provides two 10GE network ports for connecting 
to the Base network ports of the switch modules in slots 2X and 3X. The LOM supports Wake 
on LAN (WOL) and PXE functions. 

Summary of Contents for FusionServer CH242 V5






























































Reviews: