XEV Y0210, Manual, Page: 85 / 142

77
Vehicle start
−
Make sure the remote key is in the
vehicle;
−
Confirm that the gear knob is turned
to the "N" position;
−
Step on the brake pedal;
−
Press the start button, then the
"READY" indicator on the dashboard is on
within 10s ;
−
Release the parking brake pedal.
Low power consumption
BCM sleep condition
−
After the vehicle enters the fortification
state, BCM enters the sleep mode
within 2s; when the vehicle exits the
fortification state or enters the alarm
state, the BCM will enter the normal
working state within 0.2s.
BCM CAN sleep conditions
−
IGN OFF, CAN stops after 10s;
−
The doors are closed within 10
seconds. There is no switch action,
remote command, or IGN ON;
−
If the remote lock is completed,
CAN immediately goes to sleep;
−
Other CAN modules do not send
CAN messages or commands, and
CAN signals sleep for 10S.
BCM wake-up conditions
−
ACC ON (press start button);
−
Either door opening, or anti-theft
alarm;
−
Receive commands or data from
other CAN modules;
−
Receive BCM wake-up request;
−
Remote locking or unlocking, re-
mote searching vehicle;
−
The emergency button is pressed;
−
Remote window opening or closing;
−
Step on the brake pedal.
Pedal
1 2
1 Brake pedal
2 Accelerator pedal
◆
Do not store anything in the driver's
foot space. The goods may slip into the
pedal area, which may hinder the driver's
operation. In emergency braking or emer-
gency situations, the driver can not oper-
ate the brake pedal or accelerator pedal,
which is easy to cause traffic accidents.
◆
Driving in high heels is prohibited.
Charging Instrument&control Lighting Safety Vehicle Start&driving Emergency Maintenance Technical information
Warning
Start and running