XEV Y0210, Manual, Page: 49 / 142

41
◆
The electric window can still be
operated within about 1min after the
start switch is "OFF".
◆
Please do not press the two window
buttons at the same time to make the
windows at the driver side and
passenger side ascend or descend at
the same time, otherwise the working
current will be too large, which may
damage the electrical components of
the ascending/descending mechanism.
◆
Please check whether the windows
are closed before leaving the vehicle.
Window control scheme for frameless
windows
1. This model uses frameless windows,
the windows will ascend to the sealing
rubber strip.
2. The door cannot be opened or closed
when the window is already at the top; to
open or close the door properly, the
window cannot be totally ascended to
the top, but must be lowered some
distance;
When opening the door in the vehicle
lock state, must firstly unlock the door,
pull the door handle, and the window
must slightly drop down the sealing strip;
when locking the vehicle through remote
key, if the doors are closed, start the
window ascending. The limit sensor is
for window ascending limit. Pull the inner
door handle (left/right) inside the vehicle
and leave a slot between the window
and the top to open the doors.
3. A window that has been at the limit
position or opened will not descend
when the vehicle is unlocked again.
Close the window above the limit position
remotely, and close the window after the
front door is closed.
The window closing command cannot be
initiated for the window that has already
been closed, or when the vehicle is
unlocked.
已
经
关好的
车
窗，不启
动
关窗；
车
未关
好的
车
窗，不启
动
关窗。
Charging Instrument&control Lighting Safety Vehicle Start&driving Emergency Maintenance Technical information
Caution
Window