XEV Y0210, Manual, Page: 84 / 142

76
充电装置
Button start
+4-/4+
9:'8:
9:56
+4-/4+
9:'8:
The start button has three states:
equipment, such as touch-type
OFF
"OFF" state: the power system is turned
,The indicator light goes out.
"ACC" state: power on some electrical
interactive
starts self-test.
of all electrical equipment, and the
multimedia screen, etc. The indicator light
goes out
"ON" state: switch ON the power source
vehicle
The indicator light is yellow.
◆
a slight working sound of vacuum pump can
When the vehicle is stationary after starting,
be heard for a few seconds, which is normal.
◆
After the vehicle is powered off, it can be
restarted and powered on after 5S,
otherwise the vehicle may report a fault.
Power supply states
9:56
“ACC”
Power is "OFF", the remote
key is in the vehicle, press
the start button, and unlock
the electronic steering
column at the same time.
“ON”
The power state is "OFF"
or "ACC", switch the gear
knob to "N", the remote
key is in the vehicle, do
not step on the brake
pedal, press the start
button again.
“OFF”
The power state is "ON"
or "ACC", switch the
gear knob to "N", step on
the brake pedal, the
speed is 0km/h, press
the start button.
Start function
Step on the brake pedal, under the
current state of OFF or ACC or IGN,
press the start button. If the legal key is
found, first power on ACC and unlock
electronic steering column, and check the
unlock state of electronic steering column.
If it is unlocked normally, CAN sends the
"approval of ignition key"; output power
distribution for IGN; then output the HV
request signal to trigger the high voltage.
The buzzer beeps and enters START. If
the electronic steering column is not
unlocked, the signal of "approval of
Ignition key" remains 0, no high-voltage
request signal is output, and the buzzer
beeps three times to indicate an
abnormality.
Emergency stop function
If the current state is "ON" or "START",
press the START button again. When the
current speed is less than 20km/h, "ACC/
IGN" will power OFF and return to the
"POW-OFF" state; when the speed is
higher than 20km/h, it is necessary to
press the start button for 4s before power
off.
Start and running
Caution
Caution
Start and driving
State Operation