![background image](http://html1.mh-extra.com/html/xerox/workcentre-xl2120/workcentre-xl2120_user-manual_4774219042.webp)
33
Automatic Document Feeder Misfeed
When a misfeed occurs in the feeder, the red ADF misfeed
indicator flashes on the WorkCentre Diagram, and an A1 or A2
status code will flash in the Display Window. The status code
indicates the number of originals that must be returned to the
feeder after clearing the misfeed.
A1 status code- refeed the last original.
A2 status code- refeed the last 2 originals.
This code will disappear when copying is resumed or the Clear
key is pressed.
Details for clearing the three types of feeder misfeeds are given
below
.
Input Misfeed
1. Open the Feeding Roller Cover and pull the original gently to
the left and out of the Document Feeder Tray.
2. Close the Feeding Roller Cover.
3. Open and close the Document Cover to clear the misfeed
indicator.
4. Press Start to continue copying.
Exit Misfeed
1. Open the document cover and turn the Roller Knob to
remove the misfed original from the exit area.
Note:
If paper cannot be easily removed, skip to the Roller Misfeed.
2. Close the Document Cover.
3. Press Start to continue copying.
Roller Misfeed
1. Open the Document Cover and turn the Roller Knob to
remove the misfed original from the document Feeder Tray
or the exit area. If the original is difficult to remove, gently
remove it from under the feeding roller.
2. Close the Document Cover.
3. Press Start to continue copying.
Summary of Contents for WorkCentre XL2120
