35
– E-1, E-2, E-3, E-4, E-5
(continued)
Caution:
Do not touch the shiny Drum Cartridge surface.
Scratches or smudges will result in poor copy quality.
2. Carefully remove the misfed paper in the direction shown.
If paper cannot be reached, open the paper trays and remove
misfed paper.
E-3
Fuser Area
Warning:
The fuser area is hot. Take care when removing
paper from the fuser area.
Note:
Ensure that the Alternate Paper Tray is lowered
(XL2140df only).
1. Press the Release Lever to open the Side Cover.
2. Pull down on the fuser lever.
•
This will release pressure on the paper.
Caution:
Do not pull paper up through the fusing unit. Unfused toner
may adhere in the area, resulting in smudged copies.
3. Remove the sheet of paper in the direction shown.
4. Close the Side Cover.
E-4 and E-5
(2-sided Reverse Copy XL2140df only)
Exit Area
1. Pull down on the fuser lever.
•
This will release pressure on the paper.
2. Gently pull the paper out through the exit area.
Summary of Contents for WorkCentre XL2120
