![background image](http://html1.mh-extra.com/html/xerox/workcentre-xl2120/workcentre-xl2120_user-manual_4774219022.webp)
13
Loading Paper
will flash in the copy quantity display and the green indicator
in the copier diagram will flash when:
•
a paper tray is empty.
•
paper misfeeds: paper has
not
fed all the way into the
copier.
•
a paper tray is not closed properly.
If the paper has misfed, open the paper tray indicated by the
flashing green light on the copier diagram and remove the
misfed paper.
•
Do not reuse the misfed paper.
•
Ensure that the paper is under the corner snubbers.
•
Close the Paper Tray.
•
If copying, press the Start key to make the remaining copies.
If printing, the job will automatically resume when paper is
added.
1. Lift and pull open the Paper Tray.
2. Push down on the Pressure Plate until it locks in position.
Note:
The procedures for loading paper into tray 1 and tray 2
are identical.
3. Adjust the paper guides to the desired paper size.
•
Squeeze the Side Guide.
•
Lift and insert the Rear Guide.
•
When adding paper larger than 8.5
×
11/A4, remove the
Rear Guide and store it in the pocket in front of the Side
Guide.
Summary of Contents for WorkCentre XL2120
