53
Maintenance
(continued)
3. Re-insert the print cartridge in the printer and close the scanner
module.
4. Run the Print test page to check the print quality.
Clean the print jets.
This operation should ONLY be attempted as a last resort, before
changing the print cartridge.
1. Dampen a lint-free cloth with distilled water; squeeze it slightly to
remove any excess water.
2. Raise the scanner module; release and remove the print cartridge that
is causing the problem.
3. Holding the print cartridge with the jets
facing downwards, blot it against the
lint-free cloth, pressing lightly.
4. Repeat the blotting operation a few times on different areas of the lint-
free cloth, to clean the jets.
5. Reinsert the print cartridge in the WorkCentre and close the scanner
module.
6. Run the print test to check the print quality.
