16
Control Panel
(continued)
Copy Features Button
Accesses the functions in the Copy Features menu.
TOOLS Button
The Tools menu contains a series of control functions that allow
you to maintain the efficiency of your WorkCentre.
How to access
With the WorkCentre in stand-by (READY TO COPY.....100%.....1),
press the
Tools
button on the control panel.
How to operate within the menu
1. To move through the menu, use the navigation buttons
∧
or
∨
on the
control panel.
2. To select the function displayed or to confirm a selection made within
the function, press the
OK
button on the control panel.
3. To make a selection within the function, use the navigation buttons < or
> on the control panel.
Menu items
PRINT HEAD ALIGNMENT
This function should be run whenever you insert, remove or replace a
print cartridge (see
Installation
and
Replacing the print cartridges
).
Pressing
OK
on the control panel when this function displayed on the
LCD initiates the operation.
PRINT HEAD CLEANING
Pressing
OK
on the control panel when this function displayed on the
LCD causes a print cartridge cleaning cycle to be executed. The LCD
displays
CLEANING...
during the operation.
RESTORE FACTORY SETTINGS
Pressing
OK
on the control panel when this function displayed on the
LCD causes the WorkCentre setup values defined in the factory to be
restored, clearing any customized settings you may have made.
