2
Safety Notes
The ON/OFF switch does not
electrically disconnect the machine from
the power supply.
The power supply cord
is the disconnect device for this
equipment. Insure that installation is near the outlet and is easily
accessible.
Your machine
is equipped with an energy saving device to conserve
power when the machine is not in use. The machine may be left on
continuously.
Slots and Openings
in the cabinet and in the back and sides of the
WorkCentre are provided for ventilation. To ensure reliable operation of
the WorkCentre and to protect it from overheating, these openings must
not be blocked or covered. The WorkCentre should never be located near
or over a radiator or heat register. This WorkCentre should not be placed
in a built-in installation unless proper ventilation is provided.
Never
push objects of any kind into the slots of the WorkCentre as they
may touch dangerous voltage points or short out parts which could result in
a fire or electric shock.
Never
spill liquid of any kind on the WorkCentre.
Never
remove covers or guards that require a tool for removal. There are
no casual operator serviceable areas within these covers.
Never
defeat interlock switches. Machines are designed to restrict
operator access to unsafe areas. Covers, guards and interlock switches
are provided to ensure that the machine will not operate with covers
opened.
Use of an extension cord with this WorkCentre is not recommended
or authorized.
Avoid
direct viewing of the document
lights. The lamps are bright and,
while not harmful, they may cause an annoying afterimage. Always keep
the document cover closed during operation and storage.
If you need safety information concerning the WorkCentre Xi or Xerox
supplied materials, you may call the following toll-free number.
In the United States or Canada:
1-800-828-6571
